Начать продавать на Satu.kz
Корзина
13 отзывов
+7 (747) 095-79-79
+7 (771) 557-53-51
улица Сейфуллина 458/1, Алматы, Казахстан
Интернет магазин профессионального оборудования
Корзина
Точка доступа Fortinet FortiAP [AP832I]

Точка доступа Fortinet FortiAP [AP832I]

578 760 

  • В наличии
  • Код: ct114429
Точка доступа Fortinet FortiAP [AP832I]
Точка доступа Fortinet FortiAP [AP832I]В наличии
578 760 
+7 (747) 095-79-79
Отдел продаж
  • +7 (771) 557-53-51
+7 (747) 095-79-79
Отдел продаж
  • +7 (771) 557-53-51
Законом не предусмотрен возврат и обмен данного товара надлежащего качества
Характеристики
Основные
ПроизводительFortinet
Интерфейс подключения к интернет (WAN)Ethernet

Dual-radio 3x3 3-stream 802.11a/b/g/n/ac Access Point with integrated antennas. Can be mounted horizontally (below the ceiling) and vertically (on a wall). Includes mounting bracket and screws. Additional Mounting brackets optional.


FortiAP Indoor — высокопроизводительные точки доступа для установки в помещениях. При работе в связке со встроенным беспроводным контроллером FortiGate может быть достигнута пропускная способность до 600 Mbps. В FortiAP Indoor использованы беспроводные технологии последнего поколения, позволяющее извлекать максимум преимуществ стандарта 802.11n.

Техническое описание FortiAP Indoor Series

Характеристики
AP832i
QOS 802.11E support (including WMM)
Dynamic WMM rate adaptation
Configurable QoS rules per user and application
Operating Modes
  • Centralized deployment mode
  • Distributed deployment mode
  • Remote VPN tunnel mode
  • MESH mode
  • Bridge mode
Security
  • WEP, WPA-PSK, WPA-TKIP, WPA2-AES, 802.11i, 802.1X (EAP-TLS, EAP-TTLS, PEAP, LEAP, EAP-FAST, EAP-SIM, EAP-AKA, and EAP-MD5)
  • 802.1X and captive portal authentication against local database on the controller, RADIUS, and Active Directory
  • RADIUS-assisted per-user and per-ESSID access control via MAC filtering
Management
  • Centrally managed by any Fortinet controller running System Director
  • Automatically discovers controllers and downloads configuration settings for plug-and-play deployment
  • Upgrades and management using System Director/Network Manager
  • Support for SNMP
  • Concurrent Clients Per Radio (Maximum / Recommended) — 128 / 40
Wireless Specifications
Radio Technologies Dual-radio, dual-band IEEE Std 802.11a/b/g/n/ac access point with six internal omnidirectional antennas
Supported Radio Technologies Dual-band, dual-radio access point
3x3:3SS (three spatial streams)
Indoor application
Supported 2.4 GHz (TurboQAM Mode) and 5.x GHz for dual-band, dual-radio operation, data rate up to 1.9 Gbps
Supported dual 5.x GHz IEEE Std 802.11ac operation with RF collocation (FCC Permit by Ask provision), data rate up to 2.6 Gbps
Supported transmit beam-forming (TxBF)
IEEE Std 802.11ac standard
IEEE Std 802.11n/ac with Orthogonal Frequency Division Multiplexing (OFDM)
IEEE Std 802.11b with Direct Sequence Spread Spectrum (DSSS)
IEEE Std 802.11ac with 20/40/80 MHz (VHT20/40/80) channel width
IEEE Std 802.11n with 40 MHz (HT40) channel width
IEEE Std 802.11a/g with 20 MHz channel
IEEE Std 802.11b with 22 MHz channel
Modulation IEEE Std 802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM
IEEE Std 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM
IEEE Std 802.11b: BPSK, QPSK, CCK
Featured 256-TurboQAM modulation for 2.4 GHz and 5 GHz operations
Supported Frequency Bands 2.400–2.4835 GHz (ISM)
5.150–5.250 GHz (UNII-1)
5.250–5.350 GHz (UNII-2, DFS)
5.470–5.725 GHz (UNII-2 Extended, DFS)
5.725–5.825 GHz (UNII-3)
Country-specific restrictions apply; adjusted by controller upon approval
Supported Data Rate (Mbps) IEEE Std 802.11ac three streams: 19.5–1300 Mbps (MCS0-HT20@800nS to MCS9-HT40@400nS)
IEEE Std 802.11ac per stream: 6.5–433.3 Mbps (MCS0-HT20@800nS to MCS9-HT40@400nS)
IEEE Std 802.11n Three streams: 13–450 Mbps (MCS9-HT20@800nS to MCS23-HT40@400nS)
IEEE Std 802.11n Per stream: 6.5–150 Mbps (MCS0-HT20 @ 800nS to MCS7-HT40@400nS)
IEEE Std 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
IEEE Std 802.11b: 1, 2, 5.5, 11 Mbps
Configurable Transmission Power Transmission power configurable in 1.0 dBm increments
Physical Specifications AP832i
Antenna Six integrated dual-band omnidirectional PIFA antennas optimized for vertical wall-mounted orientation of the AP.
Power Operates at IEEE 802.3af power
Powered by IEEE Std 802.3af or 802.3at PoE (Power over Ethernet) injector or switch
12V external power adapter (sold separately
Interfaces Networks:
One 10/100/1000 Mbps Base-T Ethernet RJ-45 port for Data uplink (G1) supports only 802.3af PoE.
One 10/100/1000 Mbps Base-T Ethernet RJ-45 port for Data uplink (G2) requires 802.3at PoE.
Six RPSMA RF connectors for external antenna SKU (AP832e)
One console port
One reset button
One Kensington security slot
Indicators One tri-color LED for AP status
Additional LEDs for Ethernet activity over two RJ45 ports (G1 & G2)
Mounting Wall, desktop, or ceiling mount Three mounting kits included with access point: – 650-00232, 15/16” T-bar and wall-mount combo adapter – 650-00233, 9/16” T-bar adapter – Flat-surface wall-mount bracket (used with 650-00232)
Dimensions (with mounting bracket): 7.1 x 7.1 x 2.7 inches (18.0 x 18.0 x 6.8 cm)
Weight 2.3 lbs (1.1 kg)
Environmental Operating temperature: 32–122°F (0–50°C)
Operating humidity: 5–95% non-condensing
Storage temperature: -40–185°F (-40–70°C) ambient
Storage humidity: 5–95% non-condensing
Regulatory Approval and Certifications
Regulatory Approval FCC (United States of America)
CE Mark (European Community)
Industry Canada (Canada)
TELEC (Japan)
Safety Approval (worldwide)
EU RoHS
For more country-specific regulatory approval, please contact your Fortinet representative
Certifications WiFi certified IEEE Std 802.11a/b/g/n (ac)
Warranty Limited lifetime warranty
Информация для заказа
  • Цена: 578 760